|
Monthly Special
Tempest
I Reel $100.00 33% off the Direct market pricing! Featured Flies Featured Book Saltwater Flies
|
|
|
Striped Bass
|
Featured Products
Albright EXP Spin, Casting & Surf Rods
50 % Off limited quantities available Albright Tempest Reel SALE
50 % Off limited quantities available |
| Striped Bass Intermediate | Striper 26ft Density Compensated |
Striped Bass Intermediate - $64.95
This line has low memory, supple monofilament core and a coldwater coating formulation as well as a translucent, intermediate running line and a DC 26 ft fast sinking head. The density compensated head will put your fly in the strike zone. Includes welded loop on the front end. This is the perfect saltwater sinking line in cooler conditions.
AquaLux WF7I – WF11I
Length: 100 ft (30.5 m)
Color: Green Tint/Clear AquaLux
|
Line Size |
Running Line Length |
Running Line Diameter |
Rear Taper Length |
Body Length |
Body Diameter |
Body 2 Length |
Front Taper Length |
Bullet Taper Length |
Tip Length |
Tip Diameter |
Total Head Length |
30 Ft Weight |
Total Length |
Tensile Strength |
| WF7I/L | 60 | 0.038 | 6 | 20 | 0.049 | 9.5 | 3.3 | 0.2 | 0.8 | 0.037 | 39.5 | 197 | 100 | 35 |
| WF8I/L | 59 | 0.039 | 6 | 21 | 0.053 | 9.5 | 3.3 | 0.2 | 0.8 | 0.039 | 40.5 | 231 | 100 | 35 |
| WF9I/L | 58 | 0.039 | 6 | 21 | 0.056 | 10 | 3.8 | 0.2 | 0.8 | 0.04 | 41.5 | 260 | 100 | 35 |
| WF10I/L | 57 | 0.039 | 6 | 22 | 0.061 | 10 | 3.8 | 0.2 | 0.8 | 0.04 | 42.5 | 305 | 100 | 35 |
| WF11I/L | 57 | 0.04 | 6 | 22 | 0.064 | 10 | 3.8 | 0.2 | 0.8 | 0.041 | 42.5 | 355 | 100 | 35 |
This line has low memory, supple monofilament core and a coldwater coating formulation as well as a translucent, intermediate running line and a DC 26 ft fast sinking head. The density compensated head will put your fly in the strike zone. Includes welded loop on the front end. This is the perfect saltwater sinking line in cooler conditions.
Available in 200, 250, 300, 350, 400, 450 or 550
grains
Length: 100 ft (30.5 m)
Each size is color coded.
|
Line Size |
Running Line Length |
Running Line Diameter |
Rear Taper Length |
Body Length |
Body Diameter |
Middle Taper Length |
Body 2 Length |
Front Taper Length |
Tip Length |
Tip Diameter |
Total Head Length |
Head Weight |
Total Length |
Sink Rate |
Tensile Strength |
| 200gr | 58.5 | 0.039 | 3 | 3 | 0.041 | 1.5 | 21.5 | 4 | 0.5 | 0.031 | 33.5 | 200 | 100 | 6.1-6.2 | 30 |
| 250gr | 67 | 0.039 | 3 | 3 | 0.042 | 1.5 | 21.5 | 4 | 0.5 | 0.033 | 33.5 | 250 | 100 | 6.5-7 | 30 |
| 300gr | 67 | 0.04 | 3 | 3 | 0.045 | 1.5 | 21.5 | 4 | 0.5 | 0.036 | 33.5 | 300 | 100 | 7.2-7.7 | 30 |
| 350gr | 67 | 0.04 | 3 | 3 | 0.048 | 1.5 | 21.5 | 4 | 0.5 | 0.039 | 33.5 | 350 | 100 | 8.2-8.5 | 30 |
| 400gr | 67 | 0.04 | 3 | 3 | 0.049 | 1.5 | 21.5 | 4 | 0.5 | 0.038 | 33.5 | 400 | 100 | 8.5-9 | 35 |
| 450gr | 67 | 0.041 | 3 | 3 | 0.051 | 1.5 | 21.5 | 4 | 0.5 | 0.04 | 33.5 | 450 | 100 | 9-9.5 | 35 |
| 550gr | 67 | 0.042 | 3 | 3 | 0.057 | 1.5 | 21.5 | 4 | 0.5 | 0.041 | 33.5 | 550 | 100 | 9.5-10 | 35 |
510 908-1809
